76
Equalizer
This unit is equipped with a parametric
digital equalizer. In this case, paramet-
ric means that one frequency can be
increased or decreased (GAIN +8 to -
8) individually for each of the five filters.
The following filters are available:
● SUB LOW EQ 32 - 50 Hz
● LOW EQ 63 - 250 Hz
● MID EQ 315 - 1,250 Hz
● MID HIGH EQ 1,600 - 6,300 Hz
● HIGH EQ 8,000 - 12,500 Hz
These filters can be set without the need
for measuring equipment. They will al-
low you to significantly influence the
sound characteristics in your vehicle.
Notes on adjusting the settings
We recommend you use a CD that you
are familiar with for making changes to
the settings.
Before adjusting the equalizer, set the
sound and volume distribution settings
to zero and deactivate loudness. For
further details, refer to the chapter enti-
tled “Sound and volume distribution set-
tings”.
➮ Listen to the CD.
➮ What impression does the sound
give you?
➮ Now read the “Sound impression”
column in the table entitled “Help
adjusting the equalizer”.
➮ Set the equalizer values as de-
scribed in the “Measures” column.
Switching the equalizer on/off
➮ To switch the equalizer on, keep
the DEQ button < pressed until
EQ lights up and “EQ ON” briefly
appears in the display.
➮ To switch the equalizer off, keep
the DEQ button < pressed until
EQ disappears and “EQ OFF”
briefly appears in the display.
Adjusting the equalizer
➮ Press the DEQ button <.
➮ Press the or button : to se-
lect “USER”.
➮ Press the or button : to se-
lect the filter.
➮ Press the or button :.
➮ Press the button : to select the
frequency.
➮ Press the or button : to ad-
just the level.
➮ To select the next filter, first press
the OK button ; and then the
or button :.
➮ When you have finished making all
your changes, press the DEQ <
button.
EQUALIZER
To Next Page
Loading...
