DANSK
59
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
PTY-EON
If you specify the programme type and
start seek tuning, the unit will switch from
the current station to a station of the
selected programme type.
Note:
● If no station is found that corre-
sponds to the selected programme
type, you will hear a beep and “NO
PTY” appears briefly in the display.
The radio will then retune to the
station that was received last.
● If the tuned radio station or another
station on the broadcasting net-
work broadcasts the required pro-
gramme type at a later point in
time, the radio automatically
switches from the currently tuned
station or from CD mode / CD
changer mode to the station whose
programme type matches the one
you selected.
Switching PTY on/off
➮ Press the MENU button 8.
➮ Keep pressing the or button
: until “PTY ON” or “PTY OFF”
appears in the display.
➮ Press the or button : to
switch PTY ON or OFF.
When PTY is switched on, PTY appears
in the display.
➮ Press the MENU button 8 or OK
;.
Selecting a programme type and
starting seek tuning
➮ Press the or button :.
The current programme type appears
in the display.
➮ If you want to select another pro-
gramme type, you can do so by
pressing the
or button :
whilst this display is visible.
Or
➮ Press one of the buttons 1 - 5 >
to select a programme type that is
stored on one of these buttons.
The selected programme type is dis-
played briefly.
➮ Press the or button : to start
seek tuning.
The next station corresponding to your
selected programme type will then be
tuned into.
Storing a programme type on a
station button
➮ Select a programme type using the
or button :.
➮ Press the required station button 1
- 5 > for longer than two seconds.
The programme type is now stored on
the station button 1 - 5 > that you se-
lected.
RADIO MODE