Blendtec BD8 - Operational Usage Warnings; Electrical Power Requirements; Electrical Safety and Cleaning

6
use the unit outdoors where it will be subject to precipitation. This will void the
warranty.
1.9 NEVER put items such as metal, rocks, or other hard materials into the
blender jar. Metal utensils and other hard objects can damage the blender jar
and will void the warranty.
1.10 NEVER operate the unit with attachments not sold or authorized by
Blendtec. The use of unauthorized attachments may cause fire, electric shock,
unit malfunction, or injury. Damage incurred by the use of such attachments
will not be covered by warranty.
1.11 ALWAYS operate the blender with the clear door closed.
1.12 ALWAYS secure the blender jar lid before starting the machine.
Even within the blending chamber it is important to put a lid on the blender jar
before initiating a blend cycle.
1.13 The blender jar blades are sharp – handle carefully.
1.14 Power Requirements
Model BD8-502 POWER CORD
120V, 1800W, 15A, 50-60 Hz. It is recom-
mended that a dedicated 20A receptical be
used.
NEMA 5-15P
Model BD8-503 POWER CORD
120V, 1800W, 7.5A, 50-60 Hz. It is recom-
mended that a dedicated 10A receptical be
used.
Varies by Country
1.15 DO NOT use any other electrical equipment on the same circuit as the
unit or you risk overloading the circuit and either burning the fuse or possibly
the electronics inside the unit. This will void the warranty. ALWAYS use a surge
protector device.
1.16 NEVER use a water jet to clean the unit. Use of a water jet to clean the
unit can result in malfunction or damage to the unit. This type of damage/mal-
function will not be covered under warranty.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT
We took care to ensure your machine was clean when it was shipped from
the factory, but since we do not have any control over shipping conditions we
strongly recommend that you sanitize the machine before you prepare any
drinks. (See Section 5.4)