Patient Monitor User’s Manual
1-3
The device uses resistive touchscreen, using stylus or
fingernail will improve sensitivity.
3. Alarm pause button
z It can pause the alarm for 120s when alarm volume is
on.
z Pressing it can change the alarm message to prompt
message when “Sensor off” alarm happens.
4. Main interface button
z Press this button to return to main interface when it is
on menu setting.
z Press this button to shift between different display
modes when it is in main interface.
5. Menu
z Press this button to enter into menu interface when it is
on main interface.
z Press this button to return to main interface when it is
on menu setting interface.
6. Battery charging indicating lamp
z It is orange when the device is being charged.
z It turns off when the battery is full or device isn’t being
charged
1.2.2 Rear View
To Next Page
Loading...
Need help?
General