Patient Monitor User’s Manual
9-1
Chapter 9 Maintenance and Cleaning
9.1 Introduction
Keep your equipment and accessories free of dust and dirt.
To avoid damage to the equipment, follow these rules:
1. Always dilute according the manufacturer’s instructions
or use lowest possible concentration.
2. Do not immerse part of the equipment in the liquid.
3. Do not pour liquid onto the equipment or accessories.
4. Do not allow liquid to enter the case.
5. Never use abrasive materials (such as steel wool or silver
polish), or erosive cleaners (such as acetone or
acetone-based cleaners).
Warning:
Be sure to shut down the system and disconnect all
power cables from the outlets before cleaning the
equipment.
For optimal performance, product service should be
performed only by qualified service personnel
0
To Next Page
Loading...
Need help?
General