Patient Monitor User’s Manual
9-4
9.3 Cleaning the Monitor
1. Common detergent and non-corrosive disinfectant used in
hospital can be applied to clean monitor, however you must be
aware that many kinds of detergents must be diluted prior to
utilization, and please use it according to the instruction of
detergent manufacturer.
2. Avoid the use of alcohols, amino or acetonyl detergent.
3. The enclosure and screen of monitor shall be free of dust, and
they can be wiped with lint-free soft cloth or sponge soaked in
detergent. While cleaning, be careful and do not spill liquid onto
the instrument and keep any liquid out of it. When wiping the
side panel of monitor, you must be especially careful to keep
water out of all kinds of cable and outlet on the panel.
4. Do not use abrasive material including wire brush or metal
brightener during cleaning because this material will damage the
panel and monitor screen.
5. Do not submerge the monitor in liquid.
6. While cable or plug of attachment accidentally gets wet,
please rinse it with distilled water or deionized water and
dry it in the environment of temperature 40 to 80 for at ℃℃
least one hour.
To Next Page
Loading...
Need help?
General