Patient Monitor User’s Manual
3-4
2. Select 【 Date Format 】 , it can be set to
【 Year/Month/Day 】、【 Month/Day/Year 】 or
【Day/Month/Year】.
3. Select【Time Format】, it can be set to【24h】or【12h】.
4. Set the current date and time and select【OK】to confirm
it.
3.7 Patient Information Setting
Please select patient information correctly before measuring,
Click 【ID】 on the left bottom of main screen to enter into
【Patient Info.】. You also can select 【Menu】→【System】
→【Patient Info.】. Setting shown as follow:
1. Click the right of 【ID】to set it values.
2. Set【Type】to【Adult】,【Pediatric】or【Neonate】.
Caution: The alarm limits of different parameters
depend on the patient type. If you set patient
type incorrectly, the monitor will judge
patient condition by current setting, which
might be wrong for your patient.
To Next Page
Loading...