Patient Monitor User’s Manual
3-2
following checks on the monitor including all connected
modules.
——Check for any mechanical damage;
——Check for any incorrect connection of all the external
cables and accessories
Warning:
If the monitor is mechanically damaged, or if it is not
working properly, do not use it for any monitoring
procedure on a patient. Contact your service
personnel.
To avoid explosion hazard, do not use the monitor in
the presence of flammable anesthetics, vapors or
liquids.
3.3 Starting the Monitor
Press the button about two seconds to turn on the
monitor. The alarm indicating lamp flashes, and then goes out.
The system gives a beep and enters the main screen.
0
To Next Page
Loading...