Patient Monitor User’s Manual
1-6
z Press it about two seconds to turn off when the monitor is
on the condition of working.
z Calibration of touch screen
Press shortcut key firstly and press power button and
immediately loose shortcut key, click the center of
appearing point on screen. If the calibration passes, it will
enter the normall interface, if not, a red fork will appear
on screen and continue to calibrate.
1.3 Display Views
This device has a function of automatic display rotation
(Gravity Activated) which provides for vertical and horizontal
positioning to maximizing space utilization and visibility.
To Next Page
Loading...
Need help?
General