Patient Monitor User’s Manual
6-3
errors, and certain patient conditions. See the
appropriate sections of this manual for specific safety
information.
Check the SpO2 sensor and its package for any sign of
damage before use. Do not use the sensor if any
damage is detected.
When disposing the disposable SpO2 probe or useless
SpO2 probe, please observe all local, state, and federal
regulations that relate to the disposal of this products
or similar products.
Caution: In case it is necessary to add a clip to fix the
fingertip sensor, the cable instead of the
sensor itself should be clipped. Please note
that the cable of sensor should not be pulled
with force.
Note:
The pleth wave is not equal to the intensity of PR
signal.
The monitor does not provide automatic
)
To Next Page
Loading...
Need help?
General