BLU-JET AT6020 - Page 137

135
AT6020
5. Insert (f) (AP2125) 1-1/4” x 2”
EdgeBent shank.
6. Install two (g) (BP3141) 3/4” x 3”
hex cap screws through
row unit weldment and
shank. Secure with (d) (BP3035)
3/4” lock washers and
(c) (BP3034) 3/4” hex nuts.
7. Attach (h) (AM2271) basket
mount to MaxPac assembly
with three (i) (BP3126) 1/2”
hex cap screws.
8. Secure with (j) (BP3043)
1/2” lock washers, one
(k) (BP3042) 1/2” hex nut
and two (l) (AM2273) nut
plates.
9. Attach torsion arm to
basket mount with
(m) (BP3300) u-bolt 5/8”-11
x 2-1/2”W x 4”L. Secure
with (n) (BP3039) 5/8”
lockwashers and (o)
(BP3038) 5/8” hex nuts.
For complete torsion arm
assembly instructions consult
Torsion arm basket section.
MaxPac AR700 Assembly
Installation
of
EdgeBent
shank
Installation
of
AAM2623
MaxPac
basket
Torsion
arm
mounting
f
AP2125
g
BP3141
d
BP3035
h
AM2271
i
BP3126
c
BP3034
j
BP3043
k
BP3042
l
AM2273
n
BP3039
o
BP3038
m
BP3300