BLU-JET AT6020 - Super 1200 Flex Coulter and Shank

77
AT6020
Super 1200 Flex Coulter and Shank Parts
BOM ID Qty Item No Description
1 1 AM2799 ASSEMBLY, COULTER ARM WITH HUB & KNEE CASTING, HD
2 1 AM2743 CASTING, COULTER KNEE, HD, MACHINED WITH BUSHINGS
2A 2 AP2274 BUSHING, 1-17/32” OD X 1-3/8” ID” X 1” OAL
2B 1 AP2477-1 CASTING, COULTER KNEE, MACHINED
3 1 AM2796 SPRING CAP & GUIDE, HD COULTER
4 1 AM2797 COULTER ARM, HD
4A 1 AP2216 DECAL, BLU-JET, SMALL, 1-1/2” X 4”
5 1 AP2029 PIN, COTTER, 5/32” X 1-1/2”
6 1 AP2704 NUT, SPINDLE, 3/4”-16
7 1 AP2705 WASHER, SPINDLE, 1-1/2” X 13/16” X .134”
8 1 AP2881D SPRING, 2.472” OD X 5.875” OAL, .468 WIRE DIAMETER
9 1 BP3072 GREASE ZERK, 1/4”-28
10 1 BP3404 MACHINERY BUSHING, 2-1/8” OD X 1-3/8” ID X 10 GAUGE, PLATED
11 1 BP3405 SNAP RING, 1-3/8” EXTERNAL, 5160-137
AP2707, HUB ASSEMBLY, 4 BOLT
AM2799, ASSEMBLY, COULTER ARM WITH HUB & KNEE CASTING, HD
AAM2728 COULTER, SUPER 1200, 16, 1 ROW
BOM ID Qty Item No Description
1 1 AAM2728 COULTER, SUPER 1200, 16, 1R
2 1 AM2735 COULTER SHANK, 16”
3 1 AM2799 ASSEMBLY, COULTER ARM W/ HUB & KNEE CASTING, HD
4 1 BP3162 PIN, ROLL, 3/8” X 2”, PLATED
5 1 BP3205 MACHINERY BUSHING, 2-1/2” OD X 1-3/4” ID, 10GA, PLATED
6 1 BP3519 PIN, ROLL, 3/8” X 2-1/2”, PLAIN
7 1 BP3534 PIN, ROLL, 7/32” X 2-1/2”, PLAIN
BOM ID Qty Item No Description
1 1 AP2707 HUB ASSEMBLY, 4 BOLT
2 1 AP2703 HUB CAP, 1610
3 1 AP2706-1 HUB W/ CUPS, 4 BOLT, 5” BC, 3.62” PILOT, W/ZERK HOLE
3A 1 AP2075 BEARING CUP, LM 11910
3B 1 AP2524 BEARING CUP, LM 67010
4 1 AP2747 GREASE SEAL, 15235TB
5 1 AP2023 BEARING CONE, LM 67048
6 1 AP2024 BEARING CONE, LM 11949
7 4 AP2702 HEX CAP SCREW, 1/2”-20 X 1”, GRADE 5, PLATED
8 1 BP3072 GREASE ZERK, 1/4”-28