BLU-JET AT6020 - Page 38

36
AT6020
Center Section Area of Bundle 66000103
24 2 AM4564 CYLINDER LUG, SCREW ADJUST
24A 2 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
25 2 AM4566 WING LATCH PIVOT, SECONDARY WING
26 2 AM4567 SPACER PIPE, 6-1/4” OAL
27 4 AM4568 SECONDARY WING LOCK PLATE
28 1 AM4759 TURNBUCKLE WRENCH, 3-1/16”
28A 1 AP2413 GRIP, JACK HANDLE
29 1 AM5158 TONGUE, CAT IV, EXTENDED, WEIGHTED
30 1 AM6163 WHEEL LEG, LH, W/ 2-3/4” SPINDLE LOOP
30A 1 BP3213 GREASE ZERK
30B 1 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
30C 2 BP3538 TENSION BUSHING, 2” X 1-3/4” X 1-1/2” OAL
31 1 AM6164 WHEEL LEG, RH, W/ 2-3/4” SPINDLE LOOP
31A 1 BP3213 GREASE ZERK
31B 1 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
31C 2 BP3538 TENSION BUSHING, 2” X 1-3/4” X 1-1/2” OAL
32 1 AM6172 FRAME, MAIN, AT6020
32A 1 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
33 4 AM6179 LINKAGE, CYLINDER LUG SUPPORT
34 1 AM6182 LINKAGE, TONGUE CYLINDER ARM
34A 4 BP3072 GREASE ZERK, 1/4”-28
34B 1 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
35 1 AM6183 LINKAGE, TONGUE CYLINDER
36 1 AM6187 WING, PRIMARY, LH, AT6010
36A 2 BP3072 GREASE ZERK, 1/4”-28
37 1 AM6188 WING, PRIMARY, RH, AT6010
37A 2 BP3072 GREASE ZERK, 1/4”-28
38 2 AM6202 CYLINDER LUG, BOLT-ON W/ NOTCH
38A 2 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
39 1 AM6263 BRACKET, PIVOT, DEPTH CONTROL
40 1 AM6264 ARM, VALVE, DEPTH CONTROL
41 1 AM6266 LINKAGE, STOP, DEPTH CONTROL
42 1 AM6270 BRACKET, ADJUSTER, DEPTH CONTROL
43 1 AM6271 LATCH, DEPTH CONTROL ADJUSTER
44 4 AP2215 DECAL, BLU-JET, 3 X 8
45 1 AP2222 DECAL, STAND CLEAR OF TONGUE, TONGUE LIGHT
46 1 AP2231 DECAL, FEMA, 2-1/2” X 1-1/2”
47 4 AP2234 DECAL, DANGER STAND CLEAR FALLING WING
48 1 AP2469 DECAL, SAFETY CHAIN
49 1 AP2483 DECAL, DANGER, FALLING FROM EQUIPMENT
50 2 AP2558 DECAL, AT6020 COMMERCIAL CLASS APPLICATOR
51 12 AP2711 SNAP RING, 1-1/4” EXTERNAL, HEAVY DUTY
52 2 AP2871 HOSE RETAINER
53 1 AP2914 DECAL, WARNING, HIGH-PRESSURE FLUID
54 1 AP4391 TRANSPORT CHAIN, 60,000#, 5/8’’
55 1 BM3453 SPACER
56 2 BM3465 PIN, 1-1/4” X 7-3/4: OAL, W/ 13/32 HOLE, PLATED
57 4 BM3485 PIN, 1-3/4” X 12-1/8” OAL, W/ 21/32” HOLE, PLATED
58 1 BM3487 PIN, 1” X 7-3/4” OAL, W/ 13/32” HOLE, PLATED
59 2 BM3497 PIN, 1-3/4” X 14-3/4” OAL
60 2 BM3544 PIN, 1-1/4” X 9” USEABLE
61 2 BM3547 PIN, 1-1/4” X 5-3/4” USEABLE
62 2 BM3555 HEX BOLT, 1”-8 X 7-5/16”, FULL THREAD WELDED HEAD