BLU-JET AT6020 - Page 49

47
AT6020
Primary Wing Right-hand Area of Bundle 66000103
NOTE:
Complete
bundle:
66000103
quanties
listed
31A 1 BP3213 GREASE ZERK
31B 1 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
31C 2 BP3538 TENSION BUSHING, 2” X 1-3/4” X 1-1/2” OAL
37 1 AM6188 WING, PRIMARY, RH, AT6010
37A 2 BP3072 GREASE ZERK, 1/4”-28
44 4 AP2215 DECAL, BLU-JET, 3” X 8”
47 4 AP2234 DECAL, DANGER STAND CLEAR FALLING WING
51 12 AP2711 SNAP RING, 1-1/4” EXTERNAL, HEAVY DUTY
57 4 BM3485 PIN, 1-3/4” X 12-1/8” OAL, W/ 21/32” HOLE, PLATED
59 2 BM3497 PIN, 1-3/4 X 14-3/4 OAL
60 2 BM3544 PIN, 1-1/4 X 9 USEABLE
62 2 BM3555 HEX BOLT, 1”-8 X 7-5/16, FULL THREAD WELDED HEAD
66 12 BP3001
NUT, HEX, 3/8”-16,
GRADE 2, PLATED
67 12 BP3002 WASHER, LOCK, 3/8”, PLATED
68 9 BP3003
NUT, HEX LOCK, 3/8”-16,
GRADE 2, PLATED
69 6 BP3005
HEX CAP SCREW, 3/8”-16 X 1-1/2”,
GRADE 5, PLATED
70 2 BP3006
HEX CAP SCREW, 3/8”-16 X 1”,
GRADE 5, PLATED
72 14 BP3019
NUT, HEX, 1”-8,
GRADE 2, PLATED
77 16 BP3038 NUT, HEX, 5/8”-11, GRADE 2
78 16 BP3039 WASHER, LOCK, 5/8”, PLATED
86 3 BP3115
HEX CAP SCREW, 3/8”-16 X 2”,
GRADE 5, PLATED
88 6 BP3135
HEX CAP SCREW, 5/8”-11 X 3-1/2”,
GRADE 5, PLATED
89 4 BP3136
HEX CAP SCREW, 5/8”-11 X 4,
GRADE 5, PLATED
94 2 BP3179
HEX CAP SCREW, 1/2”-13 X 8,
GRADE 5, PLATED
96 8 BP3205 MACHINERY BUSHING, 2-1/2” OD X 1-3/4” ID, 10GA, PLATED
98 2 BP3244 NUT, HEX LOCK, 1/2”-13, PLTD
99 12 BP3249 MACHINERY BUSHING, 1-7/8” OD X 1-1/4” ID, 14GA, PLATED
101 6 BP3291
HEX CAP SCREW, 1”-8 X 4”,
GRADE 5, PLATED
105 2 BP3354 U-BOLT, 5/8”-11 X 4” X 7-3/4”, PLATED
106 10 BP3375 NUT, HEX LOCK, 5/8”-11, NYLOCK