Blue Clean 620 - Locking Spray Gun Trigger; Variable Spray Nozzle Lance Installation

7
ASSEMBLY INSTRUCTIONS
5
D
A
1
6
Variable Spray Nozzle Lance Installation
While spray gun (A) is in the locked position, insert
lance (D) into the end of spray gun by inserting and
turning clockwise until fully in place. To remove,
turn counterclockwise.
Locking Spray Gun (Before Lance Installation)
To lock the trigger of the spray gun (A), aim the
gun away from you and push the lock button from
right to left. After doing so, squeeze or pull the
trigger to make sure it is locked and will not move.
Always leave lock button in locked position when
not in use. This ensures the gun is in “safe” mode
until it is ready for use.
Attach garden hose to the garden hose adapter.
Note: Flush out garden hose before connecting to
garden hose adapter.
You have now completed assembly and are ready
to begin using your electric power washer. Read
and observe all safety instructions.
Unlock
Lock
4
A
B
B
A
96647_IM_620 630 630HW 630TSS 630TSSHW_1900PSI_ENG-FR-SP_A5_3L.indd 796647_IM_620 630 630HW 630TSS 630TSSHW_1900PSI_ENG-FR-SP_A5_3L.indd 7 2023/2/17 上午10:572023/2/17 上午10:57