7
PREPARATION
Before beginning assembly of product, make sure
all parts are present. Compare parts with package
contents list and hardware contents list. If any part is
missing or damaged, DO NOT attempt to assemble the
product. Please call customer service at 1-866-235-
5112. Replacement parts will be sent no charge.
Estimated Assembly Time: 5 minutes.
Tools Required for Assembly (not included): Phillips
screwdriver.
ASSEMBLY INSTRUCTIONS
PREPARATION
1
C
B
AA
OFF/O
ON/I
2
C
A
Power Unit Assembly
Install handle (B) to power washer unit (C). Secure
with screws (AA).
Note: DO NOT use a power screwdriver. When the
screw is completely tight, give a small nal clockwise
twist of the screwdriver.
DO NOT overtighten.
Screws x 2
AA
Slide spray gun holder (A) onto left side, when facing the
power washer unit (C) as shown.
Note: This step does not require any screws.
Hardware Used:
95499_IM_BC 142 HS_ENG-FR-SP.indd 7 2020/5/22 下午2:46