2.0 INTRODUCTION
The following is a quick reference to important procedures that must be followed while using the In-plant LFT Lift Table System. It is not
intended to cover, or suggest that it does cover, all procedures necessary to ensure safe operation. All owners and operators should be
aware of and abide by all workplace safety regulations applicable to the inspection and operation of the LFT Lift Table. These laws and
regulations include but are not limited to:
• The Occupational Safety and Health Act
• Canada Occupational Health and Safety Regulations
• Occupational Safety and Health Acts for Individual States (USA), Provinces, or Territories.
• ANSI standard MH29.1
For additional information on these regulations as well as industry standards that may apply to this product, please contact:
American National Standards Institute (ANSI)
1430 Broadway
New York, NY 10018
Telephone: 212.642.4900
www.ansi.org
Lift Manufacturers Product Group (LIFT)
A Product Section of Material Handling Industry of America
A Division of Material Handling Industry
8720 Red Oak Blvd, Suite 201
Charlotte, NC, 28217-3992
Telephone: 704.676.1190
www.mhi.org/lift
2.1 WARRANTY INFORMATION
Thank you for purchasing Blue Giant products. We appreciate your business, and are confident that our product will serve you for many
years to come. In the event that you experience a problem with our product, our Customer Support Team is here to support the Blue Giant
Product(s) that you have purchased.
To validate warranty on recently purchased equipment, please complete and submit your information with our on-line Warranty Registration
at www.BlueGiant.com.
For more information about Blue Giant Warranty Support, please contact your Blue Giant Dealer. You may also visit www.BlueGiant.com or
phone 1.800.872.2583.
NOTE: All products must be registered to qualify for warranty.
DEALER INFORMATION
Name:
Contact:
Telephone:
2.2 EXCLUSION OF LIABILITY
To the maximum extent permitted by applicable law, the manufacturer assumes no liability for damage or injury to persons or property
that occur as a result of use of the In-plant LFT Lift Table equipment. Furthermore, to the maximum extent permitted by applicable law, the
manufacturer does not assume any liability for lost profits, operating downtimes, consequential, indirect, incidental, special, exemplary,
punitive or enhanced damages, or similar losses, whether incurred by owner, authorized users and other third parties. By use of the In-Plant
Table equipment, owner assumes all risk of liability for damage or injury to persons or property that occur as a result of use of the In-plant
LFT Lift Table equipment, including, with respect to owner, authorized users and other third parties.
The manufacturer reserves the right to make changes at any time to the modules, components, and accessories, concurrent with its
continuing product improvements and development program. Specifications, operating instructions, and illustrations included in this
manual are subject to change without advance notice. As the In-plant LFT Lift Table equipment is a highly customizable product, please
contact the manufacturer by telephone at 1.800.872.2583 for the latest information.
IN-PLANT LFT LIFT TABLE — OWNER'S MANUAL
6 ISSUE DATE: NOVEMBER 15, 2023 REV. 1.0 (PART # 038-475E)
To Next Page
Loading...
