bluelab Guardian Monitor - Technical Specifications

Bluelab Guardian Monitor
Bluelab Corporation Limited 15 Version1:180809_bl
Technical Specifications
pH
Conductivity
Temperature
Range
0.0 – 14.0 pH
0.0 – 5.0 EC
0 – 50 CF
0 – 2500 TDS
(EC x 500)
0 – 3500 ppm
(EC x 700)
0 – 50 °C
32 – 122 °F
Resolution
0.1 pH
0.1 EC
1 CF
50 TDS
70 ppm
1 °C
1 °F
Accuracy
(at 25°C / 77°F)
±0.1 pH
±0.1 EC
±1 CF
±50 TDS
±70 ppm
±1 °C
±2 °F
Temperature
Compensation
Yes - (if conductivity
probe is in same solution
as pH probe)
Yes
Not applicable
Operating
Environment
0 - 50 °C / 32 – 122 °F
Power Source
Input: 100 – 240 Vac 50-60Hz, 5 VA, Output: 5Vdc 1Amp
4 interchangeable plug types (USA, Euro, UK, NZ/AUS)
Calibration
Two point (pH 7.0 &
pH 4.0 or pH 10.0)
Not required
(factory calibrated)
Not required
(factory calibrated)
Other Features
Silent visual alarm, adjustable display brightness
water resistant, non-volatile memory, over and under range indicators
Contact Details
Bluelab Corporation Limited, 43 Burrows St, Tauranga 3112, New Zealand
Ph +64 7 578 0849 Fax +64 7 578 0847 Email support@getbluelab.com
Limitation of Liability:
Under no circumstances shall Bluelab Corporation Limited be liable for any claims, losses, costs and
damages of any nature whatsoever (including any consequential loss) that result from the use of, or in
inability to use these instructions and / or equipment.