Bluetti Sub Panel - Sub Panel Wiring

To Next Page

To Previous Page

- 05 -

2.3 Sub Panel Wiring

Please follow the next steps after you have properly mounted the Sub

Panel.

3) Mount the Sub Panel.

DANGER:

Please use insulating tools during installation and maintenance.

DANGER:

●Turn off all breaker before installation, and twist the main switch to “0”.

●Conﬁrm that your panel is no longer energized by utility power.

WARNING:

The AC cable should meet or exceed the requirements of National Electrical

Standards.

Figure 2.3.2 Drill & Mount

Figure 2.3.1 Drill & Mount

Mount the Sub Panel on wall from the pre-bored holes.