BLUM SERVO-DRIVE Installation Instructions

1
2
1
✓
✓
1
2
3
15
AVENTOS HK top
EN
Distribution cable installation
SERVO-DRIVE for AVENTOS
Drive unit assembly
➢ Before SERVO-DRIVE for AVENTOS assembly, the lift mechanisms
must be set so that the front remains open in different positions.
➢ If required, adjust the opening angle stop only after drive unit assembly
and before the reference run.
NOTE
➢ The telescopic arm and/or lever arm must be in the completely open
position for drive unit installation.

BLUM SERVO-DRIVE Specifications

General

Brand	BLUM
Model	SERVO-DRIVE
Category	Servo Drives
Language	English