EasyManua.ls Logo

BLUM SERVO-DRIVE

BLUM SERVO-DRIVE
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Blum transformer safety distance
Assembly on the top panel
The dimensions in the drawing take into account the safety
distance.
NOTE
A safety distance of 30 mm must be maintained for air circulation;
otherwise, there is a risk that the Blum transformer could overheat.
WARNING
Danger of electric shock
Never open a Blum transformer. There is a danger of electric
shock.
Before starting repair or maintenance work, unplug the Blum
transformer to disconnect the power.
WARNING
There is a danger of injury if the lever springs
upward.
There is a danger of injury from the lever springing
upwards when the front is removed.
Do not push down on lever arm, instead, remove
the arm if it is in the way (not possible on
HK variant).
Do not connect the transformer to the power sup-
ply while the fronts are unattached.

Table of Contents

Other manuals for BLUM SERVO-DRIVE

Related product manuals