BLUM SERVO-DRIVE Installation Instructions

25
1
2
3
A
EN
Activating the SERVO-DRIVE switch
Setting up the wireless connection between the SERVO-DRIVE
switch and the drive unit
A switch can only be assigned to one drive unit.
Press the <SWITCH> button
until the LED flashes green.
Press the SERVO-DRIVE switch
until the LED lights up green continuously.
Repeat procedure A 1–2 for additional SERVO-DRIVE switches
in the cabinet.
Operation Lights up continuously Flashes
Start-up

BLUM SERVO-DRIVE Specifications

General

Brand	BLUM
Model	SERVO-DRIVE
Category	Servo Drives
Language	English