47
PAIRING WITH THE NODE
I tried pairing my smartphone to the Node but it didn’t connect?
If pairing fails, before you attempt to pair your smartphone again:
1. Toggle the smartphone’s Bluetooth off and on.
2. Toggle the smartphone’s Airplane mode on and off.
3. Restart the App.
4. Cycle power to the Node off and on.
If the above does not solve the problem, clear the Node’s memory of all paired
devices and try pairing the smartphone again.
I tried pairing my smartphone to the Node but the Controller displays --?
If your system has a Controller, and the Controller displays -- when pairing with
the Node, this indicates the Node is already paired to four devices and cannot
support any more devices.
Follow the instructions in Clearing the Node, then pair your smartphone. Don’t
forget to also pair the Controller again.
How do I unpair the Node from my device?
1. From the App home screen, press the Settings icon.
2. Press Bluetooth Connection.
3. Press Unpair.
I tried pairing my smartphone to the Node but the Display failed?
If your system has a Display, and the Display failed when pairing with the Node,
this indicates the Node is already paired to four devices and cannot support any
more devices.
In this case, unpair one of the connected devices and try again.
Alternatively, clear all previously paired devices and pair your smartphone and
the Display again.
To Next Page
Loading...