Turn key 1 in the topcase lock
to the RELEASE position.
The handle pops out.
Pull handle 1 up as far as it will
go.
Lift the topcase at the rear and
remove it from the luggage
carrier.
Installing topcase
with topcase
OA
Pull the handle up as far as it
will go.
Hook the topcase into position
on the luggage carrier. Make
sure that hooks 4 are securely
seated in the corresponding
keepers 5.
Push handle 3 down until it
engages.
Turn the key in the topcase
lock to the LOCK position and
remove the key from the lock.
Maximum payload and
maximum permissible
speed
Note the maximum permissible
payload and the speed limit for
riding with topcase fitted, as
stated on the label inside the
topcase.
Contact your authorised BMW
Motorrad dealer if you cannot
10
136
z
Accessories
To Next Page
