Securing motorcycle
for transportation
Make sure that all components
that might come into contact
with straps used to secure the
motorcycle are adequately pro-
tected against scratching.
ATTENTION
Vehicle topples to side when
being lifted on to stand.
Risk of damage to parts if vehicle
topples.
Secure the vehicle to prevent it
toppling, preferably with the as-
sistance of a second person.
Push the motorcycle onto the
transportation flat and hold it in
position: do not place it on the
side stand or centre stand.
ATTENTION
Trapping of components.
Component damage
Do not trap components such
as brake lines or cable legs.
At the front, secure the straps
to the bottom fork bridge on
both sides and tighten the
straps.
At the rear, secure the straps
to the rear footrests on both
sides and tighten the straps.
Tighten all the straps uniformly;
the vehicle's suspension should
be compressed tightly front
and rear.
7
81
z
Riding
To Next Page
Loading...
