Mirrors
Adjusting mirrors
Turn the mirror to the correct
position.
Adjusting mirror arm
Push protective cap 1 up over
the threaded fastener on the
mirror arm.
Counter-holder nut 2 and turn
the mirror arm to the desired
position.
Push the protective cap over
the threaded fastener.
Headlight
Headlight beam throw and
spring preload
Headlight beam throw is gener-
ally kept constant when spring
preload is adjusted to suit load.
Spring preload adjustment might
not suffice only if the motorcycle
is very heavily loaded. Under
these circumstances, headlight
beam throw has to be adjusted
to suit the weight carried by the
motorcycle.
NOTICE
If there are doubts about the cor-
rect headlight beam throw, have
the setting checked by a special-
ist workshop, preferably an au-
thorised BMW Motorrad dealer.
5
54
z
Adjustment
To Next Page
Loading...
