OFF: Stopwatch operated by
means of button 2 in the in-
strument panel.
The new setting is saved after
a brief delay.
Automatic Stability
Control
with Automatic Stability Control
(ASC)
OE
Switch off the ASC
function
Switch on the ignition.
NOTICE
You have the option of deactiv-
ating the ASC function while the
motorcycle is on the move.
Press and hold down button 1
until the ASC telltale and warn-
ing light changes status.
ASC telltale and warning
light shows.
Release button 1 within two
seconds.
ASC telltale and warning
light remains on.
ASC function is switched off.
Switch on the ASC
function
Switch the ignition off and then
on again to re-activate the ASC
function.
NOTICE
An ASC fault has occurred if the
ASC telltale and warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
Alternatively, press and hold
down button 1 until the ASC
4
46
z
Operation
To Next Page
Loading...
