BMW HP4 RACE User Manual

Maintenance confirmations
BMW Service standard scope
The repair procedures belonging to the BMW Service standard package are listed below. The actual
maintenance work applicable for your vehicle may differ.
Performing the vehicle test using the BMW Motorrad diagnosis system
Checking steering-head bearing
Checking the coolant level
Checking the attachment of the clutch lever fitting
Checking the clutch cable and clutch lever play
Lubricating the clutch control
Checking front brake pads and brake disks for wear
Checking the rear brake pads and brake disk for wear
Checking and lubricating the chain drive
Checking the tires' condition and checking for damage
Performing the vehicle test using the BMW Motorrad diagnosis system
Confirm the BMW service in the vehicle literature
13
180
z Service

BMW HP4 RACE Specifications

General

Displacement	999 cc
Torque	120 Nm at 10, 000 rpm
Fuel Capacity	17.5 liters
Seat Height	831 mm
Engine Type	Water-cooled inline 4-cylinder 4-stroke engine, four titanium valves per cylinder, BMW ShiftCam
Power	215 hp (158 kW) @ 13, 900 rpm
Transmission	6-speed
Frame	Carbon fiber
Weight	171 kg (dry)
Front Suspension	Öhlins FGR 300 upside-down fork
Rear Suspension	Öhlins TTX 36 GP
Brakes	Brembo GP4 PR monoblock calipers, dual 320 mm discs (front), Brembo 4-piston caliper, single 220 mm disc (rear)