Gearshift rod length
10.3 in (260.8 mm) (Delivery
status)
10.3...10.7 in
(260.8...272.8 mm)
(Adjustment range)
Tighten nuts 1 and 2, taking
care to counter on the gearshift
rod 3.
Make sure that joints are not
stressed on tightening.
Seat height
Adjusting the seat height
Remove screws 1.
Remove screws 2.
The tail section can be installed
in the position A, B or C.
When doing so, make sure that
the same height is set at the
front and rear.
Position A is the delivery sta-
tus.
5
69
z
Setting
To Next Page
