Turning the safety functions on/off
Press the button.
The LED is illuminated when the safety
function is switched on.
Glass sunroof
Principle
The glass sunroof can be set either transparent
or opaque for sun protection and screen.
General
The glass sunroof is automatically set opaque
when the vehicle is exited with transparent glass
sunroof.
If the vehicle is unlocked within approx. six hours,
the glass sunroof will automatically switch to the
transparent state.
Overview
Button in the vehicle
Glass sunroof
Operating requirements
The glass sunroof can be operated under the
following conditions.
▷ Standby state is switched on.
▷ Drive-ready state is switched on.
Setting the glass sunroof opaque/
transparent
Press the button.
▷ The opaque glass sunroof is set transparent.
▷ The transparent glass sunroof is set opaque.
Function limitation
The degree of transparency may vary at extreme
temperatures.
Seite 113
Opening and closing
CONTROLS
113
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
