Charging status display
Safety note
WARNING
Even when the display shows that the high-
voltage battery is discharged, the high-voltage
system will still be carrying high-voltage. There
is a risk of injury or fire. Do not touch or modify
live parts, for example orange high-voltage ca‐
bles, even if the batteries are empty.
Display
With turned on standby state and
drive-ready state, the available
battery charge state of the high-
voltage battery is continuously
displayed in percent in the instru‐
ment cluster.
An arrow next to the battery icon indicates the
vehicle side on which the charging socket flap is
located.
In case of temperature fluctuations, the battery
charge state may change.
Power display
Principle
The power display indicates the currently drawn
drive power as a percentage of the overall power.
General
The available drive power may be reduced due
to the following factors:
▷ Heavily discharged high-voltage battery.
▷ Extreme outside temperatures.
▷ Prolonged or high-power driving, for example,
with a sporty driving style or uphill driving.
The grey ePOWER area is automatically adjus‐
ted.
Different icons in the power display advise of the
causes for a reduced drive power.
For example: reduced drive power due to
a cold or overheated drivetrain.
The intensity of the energy recuperation de‐
pends on the energy recuperation settings.
For further information:
▷ Increasing the range, see page 317.
▷ Driving in detail: eDRIVE, see page 142.
Display
In drive modes Personal Mode and Efficient
Mode:
Pointer in the area of arrow 1: display of the en‐
ergy recuperation achieved when rolling to a stop
or or when decelerating.
Pointer in the area of arrow 2: power as a per‐
centage.
Recuperation display
Depending on the setting for the recuperation,
the display in the power display will change.
Seite 163
Displays
CONTROLS
163
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
Need help?
General
