BMW iX - Integrated Key; Replacing the Battery

If the lost vehicle key has an assigned BMW ID or
driver profile, the connection to this vehicle key
must be deleted. A new vehicle key can then be
assigned to the BMW ID or driver profile.
Replacing the battery
NOTE
Improper batteries in the vehicle key can dam‐
age the vehicle key. There is a risk of material
damage. Always replace the discharged battery
with a battery with the same voltage, the same
size and the same specification.
1.
Press and hold the button, arrow 1, and re‐
move the cover, arrow 2, to the side.
2. Remove the battery housing from the vehicle
key to the side.
3. Remove the battery from the battery housing.
4. Insert a type CR 2032 3V battery with the
positive side facing down.
5. Insert the battery housing into the vehicle
key.
6. Insert the cover into the vehicle key.
Dispose of old batteries at a Service
Partner of the manufacturer or another
qualified Service Partner or a specialist
workshop or hand them in to an authorised col‐
lecting point.
Integrated key
General
The integrated key enables the driver's door to
be unlocked and locked without the vehicle key.
Depending on the national-market version, the
integrated key fits the glove compartment.
The integrated key is used to operate the key
switch for the front passenger airbags.
Seite 91
Opening and closing
CONTROLS
91
Online Edition for Part no. 01405A38CB9 - VI/21