▷ Maxi-Cosi CabrioFix.
▷ Maxi-Cosi EasyFix Base.
▷ Römer TRIFIX 2.
▷ Römer KIDFIX series.
For Australia/New Zealand:
Child restraint systems
General
In accordance with ADR 34/03, provisions have
been made to allow installation of a child restraint
system at each rear seat position.
The anchoring hooks which belong to the upper
restraining strap of the child restraint system -
AS 1754, can be applied immediately to the rele‐
vant mount.
Please refer strictly to the installation instructions
supplied with the child restraint system.
Each seat position is fitted with a head restraint.
Safety notes
WARNING
Child restraint anchorages are designed to
withstand only those loads imposed by cor‐
rectly fitted child restraints. Under no circum‐
stances are they to be used for adult seat belts,
harnesses or for attaching other items or equip‐
ment to the vehicle. After using and removing
child restraints, fold away the anchor brackets if
necessary.
WARNING
If the rear seat backrest is not locked, the pro‐
tective effect of the child restraint system will
be limited or lost. The rear seat backrest can
fold forward in certain situations, for example
when braking or in the event of an accident.
There is a risk of injury or even death. Make
sure that the rear seat backrests are locked.
WARNING
If the upper retaining strap is used incorrectly
on the child restraint system, the protective ef‐
fect will be reduced. There is a danger of injury.
Make sure that the upper retaining strap is not
twisted and is not routed to the upper mount‐
ing point over sharp edges.
Attachment points
Icon Meaning
The corresponding icon shows
the top tether eyelet.
Depending on the equipment, there are two
outer attachment points or three other attach‐
ment points for child restraint systems with
tether straps.
Seite 134
CONTROLS
Carrying children safely
134
Online Edition for Part no. 01405A38CB9 - VI/21
To Next Page
Loading...
