6. Key Learn
6.1. CAS1/CAS2/CAS3/CAS3+ Function
Main menu interface->>>Key learn->>>CAS key learn (PICTURE 6.1-1)
(PICTURE 6.1-1)
Mainly Function:
Connect: Connect to CAS to get general information
1) CAS ID: CAS version information
2) CAS type: Classification type of CAS
3) Key cutting code: The code use for cut key, you can use CNC to cut original key
out directly. It is very convenient for all key lost, avoid changing lock.
4) CAS remote control frequency: You need select correct remote frequency
accord this value when you add key. Of course you can detect frequency with
Remote Frequency Detect (“F” button on VVDI2-BMW device) when you have remote
control at hand.
5) Current key in ignition switch is: The position at immo system for ignition key.
Get Key Info: OBD read key cutting code, remote control frequency, remote data and
IMMO data etc. You must run this function before OBD prepare key.
Write Key Info: Load key info file that get from Get Key Info, then write the key
information into CAS. When data is lost or restore the original data please use this
To Next Page
Loading...