6.3-6) or (PICTURE 6.3-7)： Make sure the car have 1 keyless key at most before add
new keyless key. The lost keyless key should disabled or erased. Attention: (PICTURE
6.3-6)will come with add key, this situation keyless key don’t support unlock;
(PICTURE 6.3-7)will come with lost all key, here the keyless key can unlock by
VVDI2
(PICTURE 6.3-6)
(PICTURE 6.3-7)
After make dealer key get window (PICTURE 6.3-8): When you get this window,
indicate the key was made successfully. You can try to start car directly. If not work,
you need add this key to CAS system with Add Key or Keyless key can use Repair
Keyless Key to repair keyless
(PICTURE 6.3-8)
To Next Page