Retrofit/Installation kit No. 65 90 0 025 169 Issue date: 10.2001
Installation instructions No. 01 29 0 030 090
1 On-board monitor wiring harness
2 Aerial extension for GPS aerial
3 GPS aerial
4 On-board monitor module holder, top
5 On-board monitor module holder, bottom
6 Spacer plate
7 Plastic screw 3.5x10 (5x)
8 Self-tapping screw 3.5x6.5 (3x)
9 On-board monitor, complete
10 Double insulation-piercing connector (3x)
11 Speed nut 4.2 mm (2x)
12 Fillister self-tapping screw with washer 4.2x19 (2x)
13 Hexagonal nut with washer M6 (6x)
14 On-board monitor radio
To Next Page
Loading...
