BobsCNC QUANTUM MINI User Manual

126
Step 1 Attaching the Spoilboard to the X Frame Assembly.
The MDF Sections will overhang the front and back
end supports ⅛ inch. The Aluminum T-Slots will fit
flush to the front and back end supports
Step 1a Cover the T-slots with blue painter’s tape to
hold the M4 Nuts in place during the
installation process.
Step 1b Fill the T-slots with sixteen M4 Nuts.

BobsCNC QUANTUM MINI Specifications

General

Brand	BobsCNC
Model	QUANTUM MINI
Category	Industrial Equipment
Language	English