bObsweep Bob Pro - Washing Bob’s Dustbin

Quick Start
Parts and Maintenance
Dustbin
Dustbin
Bob’s dustbin can be washed once you remove his lters.
Washing Bob’s Dustbin
1.
Push down the tab on Bob’s back and
slide the dustbin out.
2. Lift the tab to open the dustbin. Lift the
lter tray out, using the tabs for leverage.
3. Remove the lters and set them aside.
Wash the dustbin with water.
4. Allow the dustbin to fully dry before
replacing the lters and lter tray. Close
the dustbin and slide it back into Bob.
Do not force the dustbin past its
natural opening point.
When replacing the lters, make
sure the tab on the high-efciency
lter faces up.
Quick Tips:
4039