bObsweep Bob Pro - Main Brush; Cleaning Bob’s Main Brush

Quick Start
Parts and Maintenance
Main Brush
Main Brush
To maximize Bob’s efciency, it is best to clean his main brush about once a week.
Cleaning Bob’s Main Brush
1.
Push in the tabs on the main brush
frame and lift.
2. Use Bob’s cleaning tool to clean the main
brush and the notches inside Bob where
the brush is held.
3. When done, secure the brush cap to the pin end of the main brush. Lastly, replace the
main brush and main brush frame.
Parts You’ll Need: Cleaning Tool
You may use scissors to cut
away entanglements of hair,
or tweezers to unclog the
notches inside Bob.
Quick Tips:
4443