Bodet Profil 930 - Default Chapter; Table of Contents

2
Table of content
I - INITIAL VERIFICATION 3
1.1 Unpacking the clock 3
1.2 Cleaning 4
II - INSTALLATION 4
2.1 Single Face indoor clock 4
2.2 Single Face outdoor clock 4
2.3 Double Face clock 5
III - POWER SUPPLY 5
3.1 Clock with batteries 5
3.2 Clock with 230V power supply 5
DHF Slave clock (230V) : 5
AFNOR/Irig-B clock 230V : 5
3.3 AFNOR Clocks with TBT power supply 6
3.3.1 Indoor 6
3.3.2 Oudoor 6
3.4 DHF Clocks with TBT power supply 7
IV - SETTING 7
4.1. Impulses slave clock 7
½ minute and minute 24V // receiver, 7
½ minute and minute serial receiver (Automatically radio synchronized by
the BT radio). 8
Seconde 24V // receiver 8
4.2. AFNOR/IRIG-B time signal reception 9
4.2.1 230V Slave clock 9
4.2.2 Indoor TBT 6-24V slave clock 9
4.2.3 TBT 6-24V Outdoor Slave clock 10
4.3. Independant QUARTZ clock on battery 10
4.4. DCF radio receiver clock 10
4.5. Radio receiver clock 10
4.6. MSF radio receiver clock 11
4.7. DHF clock 11
4.8. Independent Quartz on mains with remote keyboard 11
V - TECHNICAL FEATURES 12
VI - WHAT TO DO IF...? ...CHECK. 16