BodorWelder Fiber Laser User Manual-V1.1
Bodor Inc.
service life of the laser:
（1）Please ensure that the working area is properly ventilated and that the laser
is placed in the cabinet with temperature and humidity control and dust control
function. Do not expose the laser to high temperature and humidity environment.
（ 2 ） Running the equipment at high temperatures will accelerate the aging,
increase the current threshold, and reduce the laser sensitivity and conversion
efficiency. If the equipment is overheated, please stop using it and ask the Bodor
Laser for help.
pay attention to:
◎
Please operate the equipment carefully to avoid causing accidental damage to
the equipment.
8-The source of danger
Equipment hazard sources include laser and refrigerant.
9-More security information
If you need more information on laser safety, please refer to:If you need more
information on laser safety, please refer to:
Laser Institute of America(LIA)
13501 Erenuity Drive, Suite 128
Orlando,Florida 32826
Phone:407 380 1553,Fax: 407 380 5588
Toll Free:1 800 34 LASER
American National Standards Institute
ANSI Z136.1, American National Standard for the Safe Use of Lasers
(Available through LIA)
International Electro-technical Commission
IEC 60825-1,Edition 1.2
To Next Page
Loading...