BodorWelder Fiber Laser User Manual-V1.1
Bodor Inc.
Chapter 5 Unboxing Guide
1
－
Unboxing steps
Welding machine is a precision valuables, Bodor laser recommend you to follow
the following steps, step by step unpack the box:
（1）Place the packing case containing the laser device on a horizontal platform,
such as the floor or a large table.
（2）Open the main packing box, remove the foam shielding plate, and take out
the matching items.
（3）Take out the welding gun on the side of the welding machine to ensure the
maximum bending radius of the optical fiber armor. 175mm, when taking out, it is
recommended that two people work together to lift the welding machine out.
（4）Please check the parts against the Packing List.
（5）Please properly store all unpacked items in case of future transportation or
storage needs.
WARNING：
◎ If you find any damage to the outer packaging or internal components after
receiving the product, please contact Bodor Laser or local immediately Representative
To Next Page
Loading...