BodorWelder Fiber Laser User Manual-V1.1
Bodor Inc.
Chapter 1 Description of Characteristics
The unique properties of the laser may cause safety hazards that cannot be
considered simply as other light sources, and must be noted by all those operating or
near the laser.
Therefore, Bodor Laser recommends: please strictly abide by all warnings and
safety tips in this manual to ensure safe operation and optimal performance. In the
process of operation, maintenance and service of the equipment, in order to ensure the
safety of the operators and users, do not open the equipment.
Chapter 2 Security Information
1-The handheld laser welding machine is safe for use
Hand-held laser welding machine is a dangerous, invisible laser radiation laser
products. This product emits infrared laser radiation at a wavelength of 1080nm, and
the average power radiated by the welding head is greater than 100W, which will
cause damage to the eyes and skin directly or indirectly exposed to such light intensity.
The infrared radiation is invisible, and the laser beam can cause irreversible damage
to the retina or the cornea.Always wear the appropriate and certified 1080nm
near-infrared band laser protection glasses before running the handheld laser welding
machine.
（1）For the safety of you and others, it is strictly prohibited to point the welding
head to yourself or others;
（2）Handheld laser welding machine must wear appropriate and certified 1080nm
near-infrared band laser protection glasses and high-temperature protection gloves
before use;
（3）For the safety of you and others, the crocodile clip must be clamped on the
welding workpiece before triggering the laser, and it is strictly prohibited to clamp it
To Next Page
Loading...