BodorWelder Fiber Laser User Manual-V1.1
Bodor Inc.
Materials such as silicon dioxide and aluminum oxide are prone to react with
oxygen in the air to form an oxide layer, which affects the welding effect.
(3) Transparent materials
Materials such as glass and crystal have a high transmittance to laser, making it
difficult to form a good melting pool on the surface of the material, and therefore are
not suitable for laser welding.
3-Safety regulations
As shown in the following table, all safety warning signs during the operation of
the handheld laser welding machine include:
warning:
There is potential harm to human body; follow
certain procedures, otherwise it may cause
certain harm to you or others.
Do not violate the requirements of the warning
sign during the operation to ensure the personal
safety of the operator.
This logo represents the laser radiation, and we
have attached this logo to the laser of the product
outlet end.
Warning：
Potential hazards to products;
It is necessary to follow certain procedures,
otherwise your equipment or components may
be damaged.
To Next Page
Loading...