BodorWelder Fiber Laser User Manual-V1.1
Bodor Inc.
2、Shall not be installed in corrosive, flammable gas, dust, oil mist, conductive
dust (toner, metal powder), humid high temperature, direct sunlight and other harsh
environment.
3 、 The ambient air cleanliness level required for optical fiber output heads
installation: Class 1000 or more. It is recommended to configure the corresponding
standard purification workbench.
4、Laser operating environment temperature：-20℃ – 60 ℃.
5、Laser operating environment humidity：10% - 90%.
6、Altitude：≤2000m.
7、The lighting condition of the operating room is good, and there should be no
interference from strong vibration and strong electromagnetic field equipment within
20 meters around the equipment(There is no interlocking or overlapping of wiring
harnesses between devices).
8、In order to ensure that the air in the equipment operation room is clean, the
customer should set up the air extraction and smoke exhaust system according to the
site conditions after the equipment installation and commissioning;
9、Air pressure: ≤ 8bar
To Next Page