Bofan PT600X - Set APN; Set Server; Set Time Interval

21
Command
<password>MSS<value>
Remarks
Value= number range is 1-15. Default set: 000000MSS3(The larger value, the lower sensitivity).
Set char for alert SMS contents
Command
<password>ACH<Alarm><Char>
Remarks
ACH=Alarm Char
Alarm=IN1/IN2/IN3/IN4/IN5/SPD/GEO/MLA/SKA, etc.
Clear Saved data
Command
<password>CSV
Remarks
CSV=Clear Saved data
Check previous command setting
Command
<password>ASK<Command>
Example
000000ASKSVR, to check the server & port what you set at before
000000ASKGID, to check the tracker ID what you set at before
Set ID
Command
<password>GID<ID>
Remarks
Tracker ID can’t exceed 10 digit
Set APN
Command
<password >APN<APN>,<Username>,<Password>
Remarks
If your APN doesn’t have username and password, type APN only;
(Please get the correct APN of SIM card in tracker from your SIM card provider)
Set Server
Command
<password>SVR<domain>,<Port>
Remarks
Domain: the tracking platform domain name
Port: 8600, fixed for PT600X
Set Time Interval
Command
<password>GTI<Time Interval>,<Distant Interval>, <Angle>,<Move Ratio>,<ACC Ratio>
Remarks
 Time Interval =[5-65535] (unit: second); 0,to turn off this function
 Distant Interval =[100-65535]，(unit: meter, suggest Distant Interval >500); 0, to turn off this
function
 Angle= [15-360], (unit: degree, suggest Angle > 30 ); 0, to turn off this function
 Move Ratio≧1 only integer; 0, to turn off this function
 ACC Ratio≧1 only integer; 0, to turn off this function
NOT suggest use all Distant Interval and Angle and Move Ratio and ACC Ratio if you don’t have
special needs.