Operating instructions Typ 2200 11 / 32
Betriebsanleitung Typ 2200
3.1.8 DP alarm (flushing frequency monitoring)
If "DP flushing" has been activated before the "Time-controlled backflushing"
time elapses, the "DP alarm" message appears on the display screen and the
yellow "Service" LED lights up.
3.2 Display for "Operation" mode
The green "Operation" LED lights up once the power supply has been switched
on and the controller is at operation level ("Operation" mode).
3.3 Text messages
3.3.1 Text display after switching on
After a short delay, the parameterised controller type is displayed in the second
line of the display.
Boll & Kirch Company name
xxxxxxxxxx Programme number
6.18/6.19/6.44 Controller type 0
6.21/6.22/6.23/6.24 Controller type 1
6.60 Controller type 2
6.60 Alarm DP Controller type 3
6.60.07/6.72.07 Controller type 4
6.60.07/6.72.07 AL. DP Controller type 5
6.61 Controller type 6
6.61 Alarm DP Controller type 7
6.61.07 Controller type 8
6.61.07 AL. DP Controller type 9
6.62 Controller type 10
6.62 Alarm DP Controller type 11
6.64 Controller type 12
6.64 Alarm DP Controller type 13
6.64.07 Controller type 14
6.64.07 AL. DP Controller type 15
6.72 Controller type 16
6.72 Alarm DP Controller type 17
To Next Page
Loading...