Bollfilter 2200 - P4 Back-Flushing Time; P5 Filling Time; P6 After-Blowing Time

To Next Page

To Previous Page

Operating instructions Typ 2200 15 / 32

Betriebsanleitung Typ 2200

3.5.5 P4 Back-flushing time

NOTE

This parameter is not visible with filter type P0 = 1.

3.5.6 P5 Filling time

NOTE

This parameter is not visible with filter type P0 = 0 and P0 = 1.

3.5.7 P6 After-blowing time

NOTE

This parameter is only visible with filter type P0 = 4, 5, 8, 9, 14, 15.

Adjustable in steps of one second Range 5 - 100 s

Factory setting Initial value 20 s

Text display, line 1 P4 flushing time

Text display, line 2 XXX seconds

Adjustable in steps of 10 seconds Range 10 - 600 s

Factory setting Initial value 180 s

Text display, line 1 P5 Filling time

Text display, line 2 XXX seconds

Adjustable in steps of one second Range 5 - 100 s

Factory setting Initial value 30 s

Text display, line 1 P6 After blow. t.

Text display, line 2 XXX seconds