Bollfilter 2200 - List and description of parameters

To Next Page

To Previous Page

14 / 32 Operating instructions Typ 2200

Betriebsanleitung Typ 2200

3.5 List and description of parameters

3.5.1 P0 Filter type

3.5.2 P1 Multiple flushing

NOTE

This parameter is only visible with filter type P0 = 6, 7, 8, 9, 10, 11, 12, 13, 14, 15.

3.5.3 P2 Time-controlled backflushing

3.5.4 P3 Time-controlled backflushing

Adjustable in steps of one Range 0 - 17

Factory setting Initial value 0

Text display, line 1 P0 filter type

Text display, line 2 6.18/6.19/6.44

Adjustable in steps of one Range 1 - 99 x

Factory setting Initial value 1

Text display, line 1 P1 multiple fl.

Text display, line 2 XXX chambers

Adjustable in steps of one hour Range 0 - 59 h

Factory setting Initial setting 2 h

Text display, line 1 P2 forced flush.

Text display, line 2 XXX hours

Adjustable in steps of one minute Range 0 - 59 min

Factory setting Initial value 0 min

Text display, line 1 P3 forced flush.

Text display, line 2 XXX minutes