Bollfilter 2200 - P12 Testcode; P14 Pressure Compensation Time

To Next Page

To Previous Page

18 / 32 Operating instructions Typ 2200

Betriebsanleitung Typ 2200

3.5.13 P12 Testcode

NOTE

This parameter is only visible with filter type P0 = 0.

NOTE

The test code switches the controller to a test mode which is provided for

authorised persons only.

3.5.14 P14 Pressure compensation time

NOTE

This parameter is only visible with filter type P0 = 12, 13, 14, 15.

Adjustable in steps of one Range 0 to 250

Factory setting Initial value 0

Text display, line 1 P12 Testcode

Text display, line 2 XXX

Adjustable in steps of one second Range 0 to 99 s

Factory setting Initial value 10 s

Text display, line 1 P14 PET

Text display, line 2 XXX seconds